Hampton蛋白结晶产品目录

Hampton蛋白结晶产品目录

产品编号 中文品名 英文品名
HR4-126 11 刀片替换装 Replacement #11 Blade
HR4-904 CrystalCap Magnetic Vial CrystalCap™, Vial only
HR4-729 CrystalWand Magnetic, Straight CrystalWand™ Magnetic, Straigh
HR4-837 Micro-Tools II Set Micro-Tools II™ Set
HR4-811 Micro-Tools Set Micro-Tools™ Set
HR3-172 VDX 24孔板,带密封剂 VDX™ Plate, with sealant
HR4-902 带磁力底座 CrystalCap™, without Vial
HR4-733 带磁力底座 CrystalCap™, with Vial
HR4-745 带铜管磁力底座 CrystalCap™ Copper 18 mm, with
HR4-708 冻存套 CryoSleeve™
HR3-217 硅化方形盖玻片22mmx0.22mm 22 mm x 0.22 mm Siliconized Sq
HR4-671 夹钳-弯 Vial Clamp™ – Curved, 45°/135°
HR4-670 夹钳-直 Vial Clamp™ – Straight
HR4-316 Super Glue
HR4-506 胶带 3 inch wide x 55 yard Crystal
HR3-083 结晶板 2孔 MRC 2 Well Crystallization Pla
HR3-125 结晶板 3孔 3 Well Crystallization Plate (
HR4-217 晶体探针 Crystal Probe
HR4-662 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR4-673 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR4-674 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR4-675 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR1-008 液氮罐 CX100 (含运输箱) CX100 Cryo-Express Dry Shipper
HR2-912-37   Crystal Screen 2™ #37
HR2-501   50% v/v Jeffamine® M-600® pH 7
HR2-509   1.0 M BICINE
HR2-517   100% Polyethylene glycol 300
HR2-523   50% w/v Polyethylene glycol 1,
HR2-525   50% w/v Polyethylene glycol 1,
HR2-529   50% w/v Polyethylene glycol 4,
HR2-533   50% w/v Polyethylene glycol 6,
HR2-537   1.0 M Magnesium formate dihydr
HR2-541   3.5 M Ammonium sulfate
HR2-545   2.0 M Lithium sulfate monohydr
HR2-547   7.0 M Sodium formate
HR2-549   1.6 M Sodium citrate tribasic
HR2-551   4.0 M Sodium phosphate monobas
HR2-557   2.0 M Calcium chloride dihydra
HR2-563   1.0 M Zinc acetate dihydrate
HR2-102   StockOptions™ Hepes
HR2-103   StockOptions™ Bis-Tris Propane
HR2-104   StockOptions™ Citric Acid
HR2-106   StockOptions™ Bis-Tris
HR2-107   SaltRx™ 1
HR2-109   SaltRx™ 2
HR2-110   Crystal Screen™
HR2-112   Crystal Screen 2™
HR2-114   MembFac™
HR2-116   Natrix™
HR2-117   Natrix™ 2
HR2-118   Nucleic Acid Mini Screen™
HR2-126   PEG/Ion Screen™
HR2-235   StockOptions™ Sodium Citrate
HR2-237   StockOptions™ Tris Hydrochlori
HR2-239   StockOptions™ Sodium Cacodylat
HR2-241   StockOptions™ pH
HR2-245   StockOptions™ Salt
HR2-249   StockOptions™ Succinic Acid
HR2-320   Seed Bead™
HR2-406   Detergent Screen HT™
HR2-428   Additive Screen™
HR2-434   Reductive Alylation Kit
HR2-442   Heavy Atom Screen™ Pt
HR2-444   Heavy Atom Screen™ Au
HR2-446   Heavy Atom Screen™ Hg
HR2-448   Heavy Atom Screen M1™
HR2-450   Heavy Atom Screen M2™
HR2-082   PEGRx™ 1
HR2-084   PEGRx™ 2
HR2-096   Silver Bullets™
HR2-098   PEG/Ion 2 Screen™
HR4-315   CrystalWand™ Magnetic, 45° McM
HR4-350   Large Applicator (200 & 350 µl
HR4-625   Mounted CryoLoop™ – 20 micron,
HR4-637   CryoTong™ 18 mm (standard 110
HR4-709   CryoCane™ 5 Vial Holder
HR4-711   CryoCane™ 6 Vial Holder
HR2-211   Grid Screen™ Ammonium Sulfate
HR2-213   Grid Screen™ PEG 6000
HR2-227   StockOptions™ Polymer
HR2-233   StockOptions™ Sodium Acetate
HR4-931   CryoLoop™ – 20 micron, 0.2 – 0
HR4-945   Mounted CryoLoop™ – 20 micron,
HR4-947   Mounted CryoLoop™ – 20 micron,
HR4-953   Mounted CryoLoop™ Sampler – 20
HR4-955   Mounted CryoLoop™ – 20 micron,
HR4-957   Mounted CryoLoop™ – 20 micron,
HR4-959   Mounted CryoLoop™ – 20 micron,
HR4-961   Mounted CryoLoop™ – 20 micron,
HR4-963   Mounted CryoLoop™ – 20 micron,
HR4-970   Mounted CryoLoop™ – 20 micron,
HR4-971   Mounted CryoLoop™ – 20 micron,
HR4-989   CryoLoop™ – 10 micron, 0.3 – 0
HR2-128   Crystal Screen Lite™
HR2-138   Additive Screen HT™
HR2-140   PCT™ – Pre-Crystallization T
HR4-313   Mounted CryoLoop™ – 20 micron,
HR2-601   100% Polyethylene glycol 200
HR2-607   50% w/v Polyethylene glycol 10
HR2-609   30% w/v Polyethylene glycol 20
HR2-611   100% Polyethylene glycol monom
HR2-613   50% w/v Polyethylene glycol mo
HR2-615   50% w/v Polyethylene glycol mo
HR2-625   6.0 M 1,6-Hexanediol
HR2-637   5.0 M Sodium chloride
HR2-723   1.0 M BICINE pH 9.0
HR2-755   100% Tacsimate™ pH 7.0
HR2-761   3.0 M DL-Malic acid pH 7.0
HR2-801   TCEP hydrochloride
HR2-821   2.0 M Magnesium sulfate heptah
HR2-829   100% Tacsimate™ pH 8.0
HR2-857   4.0 M TMAO
HR2-859   100% Polyethylene glycol 600
HR2-910-08   Crystal Screen™ #08
HR2-144   Index™
HR4-993   Mounted CryoLoop™ Sampler – 10
HR4-995   Mounted CryoLoop™ – 10 micron,
HR4-999   Mounted CryoLoop™ – 10 micron,
HR6-146   1.0 mm Quartz Capillary
HR8-034   Cryo Puck Carrier
HR8-035   Porcupine Push Tool
HR8-036   Puck Wand
HR8-037   Cryo Puck Base Removal Platfor
HR8-038   Angled Cryo Puck Tong
HR8-039   Cryo Puck Dewar Loading Tool
HR8-114   CrystalCap HT™, Vial only
HR8-133   Seeding Tool
HR8-173   CrystalCap™ Copper HT, 0.025 –
HR8-174   CrystalCap™ Copper HT, 0.05 –
HR8-175   CrystalCap™ Copper HT, 0.1 – 0
HR8-176   CrystalCap™ Copper HT, 0.2 – 0
HR2-575   1.0 M Sodium cacodylate trihyd
HR2-581   1.0 M Hydrochloric acid

Hampton晶体删选试剂盒

Hampton晶体删选试剂
1.Screens 晶体删选试剂盒

产品名称 货号 用途备注
Index Kit HR2-144 用于生物大分子结晶
CrystalScreen Kit HR2-110 用于蛋白质,核酸水溶性小分子结晶
Crystal Screen 2 Kit HR2-112
Pegrx 1 HR2-082 用于生物大分子结晶
Pegrx 2 HR2-084 用于生物大分子结晶
Peg/Ion Screen Kit HR2-126 用于生物大分子结晶
Peg/Ion 2 Screen™ HR2-098 用于生物大分子结晶
Saltrx Kit HR2-108 用于生物大分子结晶
Membfac Kit HR2-114 用于膜蛋白和溶解度有限的样品结晶
Crystal Screen Lite HR2-128 用于蛋白质,缩氨酸,核酸的结晶
Natrix Kit HR2-116 用于核酸和蛋白核酸复合物的结晶
Crystal Screen Cyro Kit HR2-122 用于蛋白质,可溶性缩氨酸,核酸和水溶性小分子的初次低温结晶
Nucleic Acid Mini Screen Kit HR2-118 用于核酸片段的结晶
Low Ionic Strength Screen HR2-120 用于完整单抗,单抗片段以及在低离子浓度下溶解度较低的样品结晶
Silver Bullet & Silver Bullet Bio HR2-078 用于生物大分子的初次和二次结晶
HR2-080
Peg/Tacsimate Ph5.8 Crystallization Reagent HR2-090
Peg/Tacsimate Ph 6.8 Crystallization Reagent HR2-092
Peg/Tacsimate Ph 7.8 Crystallization Reagent HR2-094
Additive Screen™ HR2-428 利用样品间和样品溶剂间相互作用来优化晶体生长和改变样品溶解度
产品名称 货号 用途备注
Detergent Screen 1 HR2-410 改善疏水作用引起的非特异性聚集
Detergent Screen 2 HR2-411
Detergent Screen 3 HR2-412
Detergent Screen HR2-408
Heavy Atom Screen Pt HR2-442 Heavy Atoms For Multiple Isomorphous Replacement
Heavy Atom Screen Au HR2-444
Heavy Atom Screen Hg HR2-446
Heavy Atom Screen M1 HR2-448
Heavy Atom Screen M2 HR2-450
I3c Phasing Kit HR3-133

2.Custom Shop Crystallization Reagents 结晶试剂盒中单独的试剂

  1. Optimize™ Reagents晶体生长条件优化试剂

⑴ Optimize™ – Polymers聚合体
⑵ Optimize™- Organics (Volatile) 挥发性有机物
⑶ Optimize™- Organics (Non-Volatile)非挥发性的有机物
⑷ Optimize™- Salts 盐类
⑸ Optimize™- Buffers缓冲液
⑹ Optimize™- Solubilizing Agents (NDSB) 溶解试剂NDSB
⑺ Optimize™ – Reducing Agent还原剂-TCEP氢氯化物
⑻ Optimize™ – Cryoprotectants
⑼ Optimize™ – Oils用于结晶的油类
⑽ Optimize™ – Silica Hydrogel硅胶
⑾ Optimize™ – LM Agarose低熔点琼脂糖
5.Crystallization Plates, Hardware & Accessories结晶耗材
⑴ 24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种
⑵ 48 Well Crystallization Plates 48孔晶体板
⑶ 72 Well Crystallization Plates72孔晶体板
⑷ 96 Well Crystallization Plates 96孔晶体板等

Hampton Siliconized Glass Cover Slides

Hampton Siliconized Glass Cover Slides

ApplicationsHanging, sitting or sandwich drop crystallization
FeaturesHigh purity of glassSiliconized, hydrophobic glass surface0.22 mm & 0.96 mm glass thicknessThicker glass slides preserve temperature longer12 mm, 18 mm, & 22 mm glass diameterCircle & squareUV Compatible (>85% transmission)
12 x 0.22 mm Circle
18 x 0.22 mm Circle
22 x 0.22 mm Circle & Square
Description
Siliconized glass cover slides allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution. These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use Dow Corning Vacuum Grease (HR3-510), Dow Corning 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate. Available in 12, 18 or 22 mm diameter circles and 22 mm diameter squares. Available in 0.22 mm or 0.96 mm glass thickness. The 0.96 mm thick slides are virtually unbreakable during crystallization handling.
The following slides are UV transmissable (>85%):
HR3-277 and HR3-279 – 12 mm x 0.22 mm Siliconized circle cover slides
HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides
HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides
HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

图片

图片
Plain Glass Cover Slides
ApplicationsHanging, sitting or sandwich drop crystallization
Features
0.22 mm glass thickness
12 mm glass diameter
Hydrophilic glass surface
Circle & squareDescription
Plain, non-siliconized, hydrophilic glass cover slides. Useful for hanging drop, sitting drop, and sandwich drop vapor diffusion crystallization methods. The hydrophilic surface creates a drop which is more flat than a drop on a siliconized surface. This offers enhanced imaging for very small drops. Use Dow Corning® Vacuum Grease (HR3-510), Dow Corning® 7 Release Compound (HR3-508), or immersion oil to seal cover slide to plate.
HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)
图片

图片
HR3-209T 12 mm Plain circle cover slides for Tecan robot 5 oz case (~2,400 slides)
PEN-VAC Kit
ApplicationsHolding and manipulating small, flat surfaces such as glass cover slides
FeaturesSelf-contained vacuumNo power neededCompactDescription
PEN-VAC is a great tool for handling small, flat surfaced objects such as plain and siliconized cover slides, as well as plastic slides. Simply depress the side button, touch the tip to the object to be lifted and release the button. PEN-VAC creates a totally self-contained vacuum that lifts up to 50 grams for up to one minute. Less than an ounce, the lightweight aluminum body fits in a pocket. No power supply needed. The kit includes one PEN-VAC with 5 3/4″ blue body, (3) angled and (3) straight probes with (2) each 1/8”, 1/4”, 3/8” diameter blue silicone vacuum cups . It is packaged in a clear plastic storage case.
图片
HR3-251  PEN-VAC Kit

Hampton AlumaSeal™ II Sealing Film and Applicator

Hampton AlumaSeal™ II Sealing Film and Applicator

Applications
Sealing film used to reseal HT format screen kits in polypropylene blocks and plates
Features
Excellent seal
Film conforms to raised chimney wells
Easily pierceable with single or multichannel pipettors and robotic probes
Heat & cold resistant, recommended for temperatures from -80 °C to +120 °C
Certified DNase-, RNase-, and nucleic-acid-free
Less evaporation than clear films
Excellent barrier properties, virtually no reagent evaporation or drying
 Description
A 38 µm soft non-permeable aluminum foil sealing film with strong medical-grade adhesive, AlumaSeal II sealing films eliminate the need for heat-sealing devices or mats during the resealing of reagents in polypropylene deep well blocks. Each sealing film measures 82.6 x 142.9 mm and offers sufficient sealing area for 96 deep well blocks. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, AlumaSeal II has less tendency to roll back on itself when removing the backing paper and it conforms well to the plate during application.AlumaSeal II is a soft, pierceable adhesive film designed for the convenient and rapid sealing of polypropylene deep well blocks. A multiple split backing with two end tabs allows for easy, accurate positioning and secure sealing. The use of an adhesive sealing film minimizes evaporation and helps to prevent well-to-well cross contamination in reagent blocks. AlumaSeal II films are easily pierced by pipettte tips or robotic probes or piercing tools for direct reagent recovery without significant gumming by adhesive.
AlumaSeal™ II Sealing Film and Applicator
AlumaSeal™ II Sealing Film and Applicator

CAT NO NAME DESCRIPTION
HR8-069 AlumaSeal II Sealing Film 100 pack
HR4-413 Film Sealing Paddle 5 pack

Hampton 24孔坐滴板 Cryschem Plate

Hampton 24孔坐滴板 Cryschem Plate
Applications
 Sitting drop crystallization
  Heavy atom soaks
  Seeding

Features
Optically clear, concave sitting drop post
Cryschem Plate – Larger footprint and round reagent reservoir
Cryschem M – Microplate footprint with round reagent reservoir
Cryschem S – Microplate footprint with square reagent reservoir
Compatible with Formulatrix Formulator
Smooth, flat top for easy seal
Each plate supplied with a cover
Materials
  Optically clear polystyrene
 Description

The Cryschem Plate is a 24 well sitting drop plate that is sealed with clear sealing tape. The polystyrene plate is supplied with a raised cover so the plate can also be sealed with vacuum grease and plain glass or plastic cover slides (22 mm diameter). The stackable, 24 well plates have distortion-free, flat bottom wells and a concave sitting drop post in the center of the well for concentric equilibration of the drop with the reagent. Each plate is individually sealed. The top of the plate and each of the 24 wells is a single, flat plane for smooth and easy seal application. Well spacing provides for a large seal area between wells to prevent cross contamination and evaporation.
上海金畔生物作为Hampton蛋白结晶产品的代理商,竭诚为您服务,欢迎新老客户咨询。
Cryschem Plate is large plate footprint with circular reagent reservoir. Cryschem plate approximate size: 15.1 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.6 cm x 1.5 cm. Typical fill volume: 500 to 1,000 µl. Well capacity: 1.5 ml. Maximum drop volume on post: 40 µl. Recommended seal: HR3-511 Crystal Clear Sealing Tape (1.88 inch x 43.7 yard roll, with cutter) or HR4-511 Crystal Clear Sealing Tape (1.88 inch x 60 yard roll, without cutter).
Cryschem M Plate is microplate footprint with circular reagent reservoir. Cryschem M microplate approximate size: 128 mm x 86 mm x 14 mm. Approximate circular reservoir size: 15 mm wide x 9 mm deep. Typical reservoir volume: 500 µl. Well capacity: 1.1 ml. Maximum drop volume on post: 30 µl. Recommended seal: HR3-609 Crystal Clear Sealing Film (100 pack), HR4-521 ClearSeal Film (100 pack) or HR4-506 Crystal Clear Sealing Tape (3 inch x 55 yard roll, without cutter). HR4-508 Crystal Clear Sealing Tape (0.75 inch x 650 inch, with cutter) seals a single row at a time.
Cryschem S Plate is microplate footprint with square reagent reservoir. Cryschem S microplate approximate size: 128 mm x 86 mm x 14 mm. Approximate square reservoir size: 15 mm wide x 9 mm deep. Typical reservoir volume: 500 µl. Well capacity: 1.1 ml. Maximum drop volume on post: 30 µl. Recommended seal: HR3-609 Crystal Clear Sealing Film (100 pack), HR4-521 ClearSeal Film (100 pack) or HR4-506 Crystal Clear Sealing Tape (3 inch x 55 yard roll, without cutter). HR4-508 Crystal Clear Sealing Tape (0.75 inch x 650 inch, with cutter) seals a single row at a time.
Cryschem Plate
Cryschem plate

CAT NO NAME DESCRIPTION
HR3-158 Cryschem Plate 24 plate case
HR3-160 Cryschem Plate 100 plate case
HR1-002 Cryschem M Plate (round reagent reservoir) 50 plate case
HR3-308 Cryschem S Plate (square reagent reservoir) 50 plate case

Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理(活性荧光染料)   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理(蛋白结晶) whatman代理(滤膜滤纸) GE代理(蛋白纯化) Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理(糖蛋白分析产品)  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton GRAS 5 • GRAS 6 Screens

Hampton GRAS 5 • GRAS 6 Screens
Applications
 GRAS reagent crystallization screen for proteins, including monoclonal antibodies, where Polyethylene glycol is the primary reagent, sampling pH 4.5 to 10
. Identify GRAS based reagents that promote crystallization of biotherapeutics for bioprocess, bioformulation, and continuous flow manufacturing applications
Features

Developed at Hampton Research
Generally Recognized As Safe reagent formulation
Samples pH 4.5 to 10; 8 unique buffers
Primary crystallization reagent:

GRAS 5: PEG 300, 400, MME 550, & 600
GRAS 6: PEG 1,000, MME 2,000, 3,350 & 4,000

 

Vapor diffusion, microbatch, free interface diffusion
Reagents soluble between 4°C and 30°C

Description

GRAS Screen™ 5 and 6 were developed by Hampton Research for the crystallization of proteins, including monoclonal antibodies. Each of the chemicals in GRAS Screen 5 and 6 has been used under one or more of the following categories. As (1) a Generally Recognized As Safe (GRAS) substance, (2) a pharmaceutical excipient, (3) a normal physiological constituent, (4) a metabolic byproduct, and/or (5) a Everything Added to Food in the United States (EAFUS) substance.
GRAS Screen 5 samples four low molecular weight Polyethylene glycols (300, 400, MME 550, and 600) at three concentrations versus eight unique buffers encompassing pH 4.5 to 10. GRAS Screen 5 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 5 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.
GRAS Screen 6 samples four medium molecular weight Polyethylene glycols (1,000, MME 2,000, 3,350, & 4,000) at three concentrations versus eight unique buffers encompassing pH 4.5 to 10. GRAS Screen 6 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 6 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.

Hampton晶体删选试剂盒

Hampton晶体删选试剂
1.Screens 晶体删选试剂盒

产品名称 货号 用途备注
Index Kit HR2-144 用于生物大分子结晶
CrystalScreen Kit HR2-110 用于蛋白质,核酸水溶性小分子结晶
Crystal Screen 2 Kit HR2-112
Pegrx 1 HR2-082 用于生物大分子结晶
Pegrx 2 HR2-084 用于生物大分子结晶
Peg/Ion Screen Kit HR2-126 用于生物大分子结晶
Peg/Ion 2 Screen™ HR2-098 用于生物大分子结晶
Saltrx Kit HR2-108 用于生物大分子结晶
Membfac Kit HR2-114 用于膜蛋白和溶解度有限的样品结晶
Crystal Screen Lite HR2-128 用于蛋白质,缩氨酸,核酸的结晶
Natrix Kit HR2-116 用于核酸和蛋白核酸复合物的结晶
Crystal Screen Cyro Kit HR2-122 用于蛋白质,可溶性缩氨酸,核酸和水溶性小分子的初次低温结晶
Nucleic Acid Mini Screen Kit HR2-118 用于核酸片段的结晶
Low Ionic Strength Screen HR2-120 用于完整单抗,单抗片段以及在低离子浓度下溶解度较低的样品结晶
Silver Bullet & Silver Bullet Bio HR2-078 用于生物大分子的初次和二次结晶
HR2-080
Peg/Tacsimate Ph5.8 Crystallization Reagent HR2-090
Peg/Tacsimate Ph 6.8 Crystallization Reagent HR2-092
Peg/Tacsimate Ph 7.8 Crystallization Reagent HR2-094
Additive Screen™ HR2-428 利用样品间和样品溶剂间相互作用来优化晶体生长和改变样品溶解度
产品名称 货号 用途备注
Detergent Screen 1 HR2-410 改善疏水作用引起的非特异性聚集
Detergent Screen 2 HR2-411
Detergent Screen 3 HR2-412
Detergent Screen HR2-408
Heavy Atom Screen Pt HR2-442 Heavy Atoms For Multiple Isomorphous Replacement
Heavy Atom Screen Au HR2-444
Heavy Atom Screen Hg HR2-446
Heavy Atom Screen M1 HR2-448
Heavy Atom Screen M2 HR2-450
I3c Phasing Kit HR3-133

2.Custom Shop Crystallization Reagents 结晶试剂盒中单独的试剂

  1. Optimize™ Reagents晶体生长条件优化试剂

⑴ Optimize™ – Polymers聚合体
⑵ Optimize™- Organics (Volatile) 挥发性有机物
⑶ Optimize™- Organics (Non-Volatile)非挥发性的有机物
⑷ Optimize™- Salts 盐类
⑸ Optimize™- Buffers缓冲液
⑹ Optimize™- Solubilizing Agents (NDSB) 溶解试剂NDSB
⑺ Optimize™ – Reducing Agent还原剂-TCEP氢氯化物
⑻ Optimize™ – Cryoprotectants
⑼ Optimize™ – Oils用于结晶的油类
⑽ Optimize™ – Silica Hydrogel硅胶
⑾ Optimize™ – LM Agarose低熔点琼脂糖
5.Crystallization Plates, Hardware & Accessories结晶耗材
⑴ 24 Well Crystallization Plates 24孔晶体板-分悬滴和坐滴两种
⑵ 48 Well Crystallization Plates 48孔晶体板
⑶ 72 Well Crystallization Plates72孔晶体板
⑷ 96 Well Crystallization Plates 96孔晶体板等

Hampton 膜蛋白结晶试剂 MembFac • Crystal Screen Lite • MembFac HT

Hampton  MembFac • Crystal Screen Lite • MembFac HT

Applications
Primary sparse matrix crystallization screen for membrane proteins and samples with limited solubility   膜蛋白和样品溶解度有限样品
Features
  Membrane protein sparse matrix screens
  Sparse matrix formula efficiently samples salts, polymers, organics and pH
  pH range 4.6 – 8.5
  Formulated for use with detergents
   Tube or Deep Well block format
   Crystal Screen Lite features a lower ionic strength than the original Crystal Screen

Description
MembFac is a highly effective sparse matrix screen specifically designed as a preliminary screen for the crystallization of membrane proteins. MembFac is based upon the highly effective biased sparse matrix methodology. The MembFac screen matrix is optimized for the crystallization of membrane proteins.
MembFac contains 48 unique reagent formulations. With this set of 48 conditions, numerous chemicals and chemical combinations are utilized, allowing one to evaluate a large variety of potential crystallization conditions. MembFac covers a broad pH range between 4 and 9.
The Rationale
The basic rationale of MembFac is to perform a sparse matrix screen while changing the detergent dimension because detergents play an important factor in the crystallization of membrane proteins. A MembFac screen is to be completed for each detergent. Detergent screens are available separately.
The Method
The membrane protein of interest is first isolated in the detergent which gives the highest stability and activity. The protein concentration should be approximately 10 to 20 mg/ml and the detergent concentration should be only slightly above the CMC. The sample is then set against MembFac, using all 48 solutions plus the screening detergent(s) of choice. The screening detergent concentration should be approximately one to three times the CMC. Hence, for each detergent screened, one would utilize approximately 1 to 2 mg of sample.
The MembFac protocol was used to crystallize membrane proteins including SQR, fumerate: quinone oxireductase, LHII, and LHCII.
Crystal Screen Lite is a sparse matrix of trial crystallization reagent conditions based upon the Crystal Screen™.3 The primary screen variables are salt, pH, and precipitant (salts, polymers, volatile organics, and non-volatile organics).2Crystal Screen Lite differs from the original Crystal Screen kit in that the primary precipitant reagents are one-half the concentration of that used in the original Crystal Screen formulation. The secondary salts, ions, and buffers remain at the original Crystal Screen concentration. Reducing the primary concentration of the primary precipitant results in a screen which is “more gentle” on the sample and typically produces much less precipitate conditions than the original Crystal Screen.
MembFac contains 48 unique reagents, 10 ml each.
MembFac HT contains 1 ml each of all 48 reagents from MembFac and reagents 1-48 from Crystal Screen Lite in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.

CAT NO NAME DESCRIPTION
HR2-114 MembFac 10 ml, tube format
HR2-128 Crystal Screen Lite 10 ml, tube format
HR2-137 MembFac HT 1 ml, Deep Well block format

Hampton蛋白结晶产品目录

Hampton蛋白结晶产品目录

产品编号 中文品名 英文品名
HR4-126 11 刀片替换装 Replacement #11 Blade
HR4-904 CrystalCap Magnetic Vial CrystalCap™, Vial only
HR4-729 CrystalWand Magnetic, Straight CrystalWand™ Magnetic, Straigh
HR4-837 Micro-Tools II Set Micro-Tools II™ Set
HR4-811 Micro-Tools Set Micro-Tools™ Set
HR3-172 VDX 24孔板,带密封剂 VDX™ Plate, with sealant
HR4-902 带磁力底座 CrystalCap™, without Vial
HR4-733 带磁力底座 CrystalCap™, with Vial
HR4-745 带铜管磁力底座 CrystalCap™ Copper 18 mm, with
HR4-708 冻存套 CryoSleeve™
HR3-217 硅化方形盖玻片22mmx0.22mm 22 mm x 0.22 mm Siliconized Sq
HR4-671 夹钳-弯 Vial Clamp™ – Curved, 45°/135°
HR4-670 夹钳-直 Vial Clamp™ – Straight
HR4-316 Super Glue
HR4-506 胶带 3 inch wide x 55 yard Crystal
HR3-083 结晶板 2孔 MRC 2 Well Crystallization Pla
HR3-125 结晶板 3孔 3 Well Crystallization Plate (
HR4-217 晶体探针 Crystal Probe
HR4-662 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR4-673 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR4-674 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR4-675 泡沫保温瓶 Spearlab Cryogenic Foam Dewar
HR1-008 液氮罐 CX100 (含运输箱) CX100 Cryo-Express Dry Shipper
HR2-912-37   Crystal Screen 2™ #37
HR2-501   50% v/v Jeffamine® M-600® pH 7
HR2-509   1.0 M BICINE
HR2-517   100% Polyethylene glycol 300
HR2-523   50% w/v Polyethylene glycol 1,
HR2-525   50% w/v Polyethylene glycol 1,
HR2-529   50% w/v Polyethylene glycol 4,
HR2-533   50% w/v Polyethylene glycol 6,
HR2-537   1.0 M Magnesium formate dihydr
HR2-541   3.5 M Ammonium sulfate
HR2-545   2.0 M Lithium sulfate monohydr
HR2-547   7.0 M Sodium formate
HR2-549   1.6 M Sodium citrate tribasic
HR2-551   4.0 M Sodium phosphate monobas
HR2-557   2.0 M Calcium chloride dihydra
HR2-563   1.0 M Zinc acetate dihydrate
HR2-102   StockOptions™ Hepes
HR2-103   StockOptions™ Bis-Tris Propane
HR2-104   StockOptions™ Citric Acid
HR2-106   StockOptions™ Bis-Tris
HR2-107   SaltRx™ 1
HR2-109   SaltRx™ 2
HR2-110   Crystal Screen™
HR2-112   Crystal Screen 2™
HR2-114   MembFac™
HR2-116   Natrix™
HR2-117   Natrix™ 2
HR2-118   Nucleic Acid Mini Screen™
HR2-126   PEG/Ion Screen™
HR2-235   StockOptions™ Sodium Citrate
HR2-237   StockOptions™ Tris Hydrochlori
HR2-239   StockOptions™ Sodium Cacodylat
HR2-241   StockOptions™ pH
HR2-245   StockOptions™ Salt
HR2-249   StockOptions™ Succinic Acid
HR2-320   Seed Bead™
HR2-406   Detergent Screen HT™
HR2-428   Additive Screen™
HR2-434   Reductive Alylation Kit
HR2-442   Heavy Atom Screen™ Pt
HR2-444   Heavy Atom Screen™ Au
HR2-446   Heavy Atom Screen™ Hg
HR2-448   Heavy Atom Screen M1™
HR2-450   Heavy Atom Screen M2™
HR2-082   PEGRx™ 1
HR2-084   PEGRx™ 2
HR2-096   Silver Bullets™
HR2-098   PEG/Ion 2 Screen™
HR4-315   CrystalWand™ Magnetic, 45° McM
HR4-350   Large Applicator (200 & 350 µl
HR4-625   Mounted CryoLoop™ – 20 micron,
HR4-637   CryoTong™ 18 mm (standard 110
HR4-709   CryoCane™ 5 Vial Holder
HR4-711   CryoCane™ 6 Vial Holder
HR2-211   Grid Screen™ Ammonium Sulfate
HR2-213   Grid Screen™ PEG 6000
HR2-227   StockOptions™ Polymer
HR2-233   StockOptions™ Sodium Acetate
HR4-931   CryoLoop™ – 20 micron, 0.2 – 0
HR4-945   Mounted CryoLoop™ – 20 micron,
HR4-947   Mounted CryoLoop™ – 20 micron,
HR4-953   Mounted CryoLoop™ Sampler – 20
HR4-955   Mounted CryoLoop™ – 20 micron,
HR4-957   Mounted CryoLoop™ – 20 micron,
HR4-959   Mounted CryoLoop™ – 20 micron,
HR4-961   Mounted CryoLoop™ – 20 micron,
HR4-963   Mounted CryoLoop™ – 20 micron,
HR4-970   Mounted CryoLoop™ – 20 micron,
HR4-971   Mounted CryoLoop™ – 20 micron,
HR4-989   CryoLoop™ – 10 micron, 0.3 – 0
HR2-128   Crystal Screen Lite™
HR2-138   Additive Screen HT™
HR2-140   PCT™ – Pre-Crystallization T
HR4-313   Mounted CryoLoop™ – 20 micron,
HR2-601   100% Polyethylene glycol 200
HR2-607   50% w/v Polyethylene glycol 10
HR2-609   30% w/v Polyethylene glycol 20
HR2-611   100% Polyethylene glycol monom
HR2-613   50% w/v Polyethylene glycol mo
HR2-615   50% w/v Polyethylene glycol mo
HR2-625   6.0 M 1,6-Hexanediol
HR2-637   5.0 M Sodium chloride
HR2-723   1.0 M BICINE pH 9.0
HR2-755   100% Tacsimate™ pH 7.0
HR2-761   3.0 M DL-Malic acid pH 7.0
HR2-801   TCEP hydrochloride
HR2-821   2.0 M Magnesium sulfate heptah
HR2-829   100% Tacsimate™ pH 8.0
HR2-857   4.0 M TMAO
HR2-859   100% Polyethylene glycol 600
HR2-910-08   Crystal Screen™ #08
HR2-144   Index™
HR4-993   Mounted CryoLoop™ Sampler – 10
HR4-995   Mounted CryoLoop™ – 10 micron,
HR4-999   Mounted CryoLoop™ – 10 micron,
HR6-146   1.0 mm Quartz Capillary
HR8-034   Cryo Puck Carrier
HR8-035   Porcupine Push Tool
HR8-036   Puck Wand
HR8-037   Cryo Puck Base Removal Platfor
HR8-038   Angled Cryo Puck Tong
HR8-039   Cryo Puck Dewar Loading Tool
HR8-114   CrystalCap HT™, Vial only
HR8-133   Seeding Tool
HR8-173   CrystalCap™ Copper HT, 0.025 –
HR8-174   CrystalCap™ Copper HT, 0.05 –
HR8-175   CrystalCap™ Copper HT, 0.1 – 0
HR8-176   CrystalCap™ Copper HT, 0.2 – 0
HR2-575   1.0 M Sodium cacodylate trihyd
HR2-581   1.0 M Hydrochloric acid

Hampton蛋白质结晶捞针(结晶环)18 mm Mounted CryoLoop™

Hampton蛋白质结晶捞针(结晶环)18 mm Mounted CryoLoop™

Applications

Cryocrystallography
Features

Adjustable loop orientation
Synthetic CryoLoop on adjustable stainless steel MicroTube
MicroTube specially engineered with EasySnap notches
20 micron diameter nylon CryoLoop

Description
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.
Using a specially designed L-shaped tool (HR5-902) with a positioning notch, one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.
The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and stake it to the CrystalCap™ Magnetic or CrystalCap™ Copper Magnetic. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.
Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicrozTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.
The HR5-902 Tool for Adjustable Mounted CryoLoop is not included with the Adjustable Mounted CryoLoop and must be purchased as a separated item.
18 mm Mounted CryoLoop™ - 20 micron
18 mm Mounted CryoLoop
18 mm Mounted CryoLoop™ - 20 micron
18 mm Mounted CryoLoop properly installed in a CrystalCap Magnetic
18 mm Mounted CryoLoop™ - 20 micron
Crystal in CryoLoop

CAT NO NAME DESCRIPTION
HR4-932 18 mm Mounted CryoLoop – 20 micron 0.025 – 0.05 mm – 25 pack
HR4-945 18 mm Mounted CryoLoop – 20 micron 0.05 – 0.1 mm – 25 pack
HR4-947 18 mm Mounted CryoLoop – 20 micron 0.1 – 0.2 mm – 25 pack
HR4-970 18 mm Mounted CryoLoop – 20 micron 0.2 – 0.3 mm – 25 pack
HR4-971 18 mm Mounted CryoLoop – 20 micron 0.3 – 0.4 mm – 25 pack
HR4-972 18 mm Mounted CryoLoop – 20 micron 0.4 – 0.5 mm – 25 pack
HR4-973 18 mm Mounted CryoLoop – 20 micron 0.5 – 0.7 mm – 25 pack
HR4-974 18 mm Mounted CryoLoop – 20 micron 0.7 – 1.0 mm – 25 pack
HR4-918 18 mm Mounted CryoLoop – 20 micron Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)

Hampton Polyethylene glycol 4,000

Hampton Polyethylene glycol 4,000

Applications
Crystallization grade Polyethylene glycol for formulating screens or for optimizatio
Features
Sterile filtered solution
Formulated in Type 1+ ultrapure water: 18.2 megaohm-cm resistivity at 25°C, < 5 ppb Total Organic Carbon, bacteria free (<1 Bacteria (CFU/ml)), pyrogen free (<0.03 Endotoxin (EU/ml)), RNase-free (< 0.01 ng/mL) and DNase-free (< 4 pg/µL)

Description
Polyethylene glycol 4,000
Synonym: PEG 4,000
H(OCH2CH2)nOH
Mr 3,500-4,500
CAS Number [25322-68-3]
EC Number 500-038-2
Merck 14,7568
RTECS TQ3500000
MDL Number MFCD00081839
PubChem Substance ID 24890217
Melting point (Starting Material) 58.0-61.0°C
Aldehyde None detected
Peroxide None detected

HR2-529 Measured pH range: 6.9 – 9.5 at 25°C
HR2-529 Measured Conductivity Range: 35.3 – 46.9 µS/cm at 25°C
HR2-529 Measured Refractive Index Range: 1.40172 – 1.40279 at 20°C

CAT NO NAME DESCRIPTION
HR2-605 Polyethylene glycol 4,000 Flake – 500 g
HR2-529 Polyethylene glycol 4,000 50% w/v solution – 200 ml

Hampton 24孔悬滴板 VDX Plate with sealant(带密封剂)

Hampton 24孔悬滴板 VDX Plate with sealant(带密封剂)
VDX Plate with sealant
Applications

Hanging drop crystallization
Sitting drop crystallization with Micro-Bridges® or Glass Sitting Drop Rods™
Dialysis crystallization with Dialysis Buttons™
Features

24 well plate with raised cover
Sealant applied to 24 wells, ready to seal with cover slides
Compatible with 22 mm diameter square and circle cover slides
Optically clear plastic
Extremely versatile and cost-effective crystallization platform
Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

Description
24 well crystallization plate for hanging drop or sitting drop vapor diffusion crystallization (when used with Micro-Bridges or Glass Rods), or dialysis crystallization (when used with Dialysis Buttons). Stackable, optically clear plastic 24 well plates with raised covers (to allow room for cover slides) and flat bottoms for exceptional optics. Raised, wide rings around each reservoir (well) minimize cross contamination and allow each well to be individually sealed with 22 mm diameter circle or square cover slides. Plates are individually wrapped and supplied with applied sealant. 15.0 cm x 10.8 cm plate footprint is convenient for manual pipetting and well access while at the same time compatible with some automated liquid handling systems. Approximate dimensions: 15.0 cm x 10.6 cm x 2.2 cm. Approximate well size: 1.7 cm x 1.6 cm. Typical well volume: 500 to 1,000 µl. Well capacity: 3.5 ml.

CAT NO NAME DESCRIPTION
HR3-172 VDX邃「 Plate with sealant 24 plate case
HR3-170 VDX邃「 Plate with sealant 100 plate case

Hampton Optimize Reagents

Hampton Optimize Reagents
1、Optimize – Polymers
Crystallization grade polymers for formulating screens or optimization
2、Optimize – Organics (Volatile)
Crystallization grade organics (volatile) for formulating screens or optimization
3、Optimize – Organics (Non-Volatile)
Crystallization grade organics (non-volatile) for formulating screens or optimization
4、Optimize – Salts
Crystallization grade salts for formulating screens or optimization
5、Optimize – Buffers
Crystallization grade buffers for formulating screens or optimization
6、Optimize – Solubilizing Agents (NDSB)
Crystallization grade non detergent sulfobetaines
7、Optimize – Reducing Agent
TCEP Hydrochloride
8、Optimize – Monoolein
LCP – Lipidic Cubic Phase
9、Optimize – Cryoprotectants
For cryoprotection of crystals
10、Optimize – Oils for Crystallization
Microbatch crystallization & oil layering
11、Optimize – Izit Crystal Dye
Izit™ color dye to differentiate protein crystals from salt crystals

Hampton Optimize Reagents

Hampton Optimize Reagents
1、Optimize – Polymers
Crystallization grade polymers for formulating screens or optimization
2、Optimize – Organics (Volatile)
Crystallization grade organics (volatile) for formulating screens or optimization
3、Optimize – Organics (Non-Volatile)
Crystallization grade organics (non-volatile) for formulating screens or optimization
4、Optimize – Salts
Crystallization grade salts for formulating screens or optimization
5、Optimize – Buffers
Crystallization grade buffers for formulating screens or optimization
6、Optimize – Solubilizing Agents (NDSB)
Crystallization grade non detergent sulfobetaines
7、Optimize – Reducing Agent
TCEP Hydrochloride
8、Optimize – Monoolein
LCP – Lipidic Cubic Phase
9、Optimize – Cryoprotectants
For cryoprotection of crystals
10、Optimize – Oils for Crystallization
Microbatch crystallization & oil layering
11、Optimize – Izit Crystal Dye
Izit™ color dye to differentiate protein crystals from salt crystals

Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Hampton PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Applications
  Primary or secondary, polymer, salt and pH matrix crystallization screen for biological macromolecules
Features

Developed at Hampton Research
PEG/Ion is a sparse matrix profile of anions and cations in the presence of monodisperse Polyethylene glycol 3,350 over pH 4.5 – 9.2
PEG/Ion 2 screens a complete profile of titrated organic acids at varying pH levels (3.7 – 8.8) in the presence of monodisperse PEG 3,350
PEG/Ion HT combines PEG/Ion and PEG/Ion 2 in a single 96 Deep Well block
 Description

PEG/Ion, developed by Hampton Research, is a crystallization screen designed to evaluate monodisperse, high purity Polyethylene glycol 3,350 and 48 unique salts representing a very complete range of anions and cations frequently used in the crystallization of biological macromolecules. The primary screening variables are PEG, ion type, ionic strength, and pH. More than 60% of the published crystallizations utilized PEG as a primary crystallization reagent and in approximately 50% of those reports, the PEG was combined with an ion as a secondary crystallization reagent. PEG/Ion reagents are formulated without a buffer and are not pH titrated.
PEG/Ion 2 is an extension to the fundamental crystallization strategy in PEG/Ion. PEG/Ion 2 reagents cover the monodisperse, high purity Polyethylene glycol 3,350 and an array of neutralized and pH adjusted organic acids, multivalent ions, a novel Citrate BIS-TRIS propane buffer system and pH (4 – 8.8). The formulation of PEG/Ion 2 was developed at Hampton Research. Each of the 48 reagents in PEG/Ion 2 contains PEG 3,350 as the polymer (precipitant). The concentration of PEG is varied from 12% w/v to 20% w/v depending upon the type and concentration of buffer/salt paired with the polymer. Thirteen of the forty-eight PEG/Ion 2 reagents contain a separate buffer component. The remaining PEG/Ion 2 reagents are buffered by the titrated organic acid salt. Six of these thirteen conditions feature a novel Citric acid BIS-TRIS propane (CBTP) buffer. The CBTP buffer uses Citric acid and BIS-TRIS propane as the acid base pair to create a two component buffer system effective across pH 2.5 to 9.5. The ratio of Citric acid to BIS-TRIS propane determines the solution pH. Thirty-five of the forty-eight PEG/Ion 2 reagents contain a neutralized or pH adjusted organic acid in the presence of the polymer. Neutralized organic acids are highly effective crystallization salts.1 Four PEG/Ion 2 reagents feature polyvalent cations. Two of these reagents contain cation mixes, saving sample by screening six different cations with only two reagents. Tryptone, a casein digest combinatorial library of peptides, is included in PEG/Ion 2. PEG/Ion 2 reagents 1-30, 42, 45-47 are formulated without a buffer and are not pH titrated.
PEG/Ion contains 48 unique reagents, 10 ml each.
PEG/Ion 2 contains 48 unique reagents, 10 ml each.
PEG/Ion HT contains 1 ml of each reagent from PEG/Ion and PEG/Ion 2 in a single Deep Well block format.
Ready-to-use reagents are sterile filtered and formulated with ultra-pure Type 1 water, using the highest purity salts, polymers, organics and buffers. Individual reagents are available through the Hampton Research Custom Shop.
PEG/Ion • PEG/Ion 2 • PEG/Ion HT

PEG/Ion • PEG/Ion 2 • PEG/Ion HT

Hampton 48孔坐滴蛋白结晶板 48-Well Crystallization Plate

Hampton 48孔坐滴蛋白结晶板 48-Well Crystallization Plate
Applications

Sitting drop crystallization
Features

One drop per reservoir
SBS format
48 well plate
9 mm standard distance between wells
Drop volume: Up to 10 µl
Reservoir volume: 50 to 200 µl
Micro-numbering alongside drop volumes
Rigid plate structure
Wide partition walls between wells improve sealing
Developed in conjunction with the MRC Laboratory of Molecular Biology in Cambridge, United Kingdom
UV compatible (UVP)
Description
MRC Maxi 48-Well Crystallization Plate for Automated Optimization
The MRC Maxi optimization plate is a breakthrough for macromolecular crystallization presented in a 48 well format. Offering easy to automate crystallization optimization with large sitting-drops, the new MRC Maxi Crystallization plate is the perfect solution. Manufactured by Swissci AG, the plate offers an SBS format while providing 48 wells. MRC Maxi is intended for large drops and is compatible both with standard robotic systems as well as manual pipetting.
The plate was developed at the MRC Laboratory of Molecular Biology (Cambridge, UK) in collaboration with Jan Löwe and Fabrice Gorrec. It is a result of many years of experience in successful robotic high-throughput crystallization and complements the original MRC crystallization plate, which is intended for smaller drop volumes and higher throughput during screening.
Drop volumes of up to 10 µl are possible. The 9 mm standard distance between wells is preserved, enabling the use of multi-channel manual pipettes and robotic liquid handlers, making MRC Maxi one of the most automation-friendly optimization plates on the market.
MRC Maxi is covered by global intellectual property and design registration as are the Swissci AG MRC 2 lens 96 well plates. Several breakthrough features of the original MRC plate have been maintained. Wells are labeled individually. Drops are raised for easy access during crystal retrieval. MRC Maxi uses the same proprietary polymer specially selected for the purpose of UV light visualization and the material used keeps through-plastic evaporation to a minimum. Well shapes are spherical but shallow.
The MRC Maxi Crystallization plate offers unique properties that make it the ideal choice for microliter-sized optimization experiments and is made from UV compatible UVP.
The advantages of the MRC Maxi Crystallization plate – in brief
Easy Crystal Retrieval
Raised wide wells make the crystal mounting especially easy.
Easy Viewing
The wells are wide conical.
Each well has a micro lens for perfect illumination.
Micro numbering readable under the microscope for each well.
The optically superior polymer (UVP) is UV transmissible.
Better Sealing
Wide partition walls between the wells give plenty of area for good sealing with tape.
Very Rigid, Automation-Friendly Plate Design
The UVP polymer reduces through-plastic evaporation to a minimum.
SBS Standard
The plates are designed to the SBS standard and are compatible with all common holders.
9 mm distance from well-to-well within columns, 18 mm distance within rows.
Unique Polymer (UVP)
Ultra-low sample binding.
No static charging.
Recommended Volumes
Volumes validated for MRC Maxi are up to 10 µl of sample drop and 200 µl of the crystallization reagent.
CAT NO NAME DESCRIPTION
HR3-179 MRC Maxi 48-Well Crystallization Plate 10 plate case
HR3-180 MRC Maxi 48-Well Crystallization Plate 40 plate case

Hampton 96孔坐滴蛋白结晶板–Intelli-Plate

Hampton 96孔坐滴蛋白结晶板–Intelli-Plate
在生命科学领域,上海金畔生物为业界提供了丰富的实验室和生物医药生产研发的产品。庆祝上海金畔生物正式成为Hampton Intelli-Plate 96孔蛋白结晶板的签约代理商,在这里要感谢广大客户多年来对上海金畔生物科技有限公司的支持和厚爱,我们将一如既往的为广大客户带来Hampton Intelli-Plate 96孔蛋白结晶板高品质的产品和服务,欢迎广大新老客户来电咨询。
Intelli-Plate 96 (Art Robbins Instruments)
Applications
  Sitting Drop Crystallization   用于蛋白坐滴结晶
Features  特征:

SBS microplate footprint & standard well spacing
Optically clear wells provide for superior crystal imaging
Well layout makes crystal harvesting easier
UV transmissible and low birefringence
2 well versions available in small and large drop well or two identical shallow drop wells
3 well versions are ideal for optimizing protein concentration, additive screens, drop ratio and combinatorial experiments
Rounded reservoir corners to prevent reservoir (MPD) creep

Description
Art Robbins Instruments has developed the ideal family of plates for crystallography applications: the Intelli-Plate. All versions of the Intelli-Plate have the SBS microplate footprint and standard well spacing and are ideal for manual or automated processing.
The Intelli-Plate 96-2 Low Profile (Art Robbins 102-0001-10 Hampton Research HR3-116 and HR3-117) is a low profile version of the Intelli-Plate 96-2 LVR (Low Volume Reservoir). Reservoir volume: 100 µl max. Drop well volume: 4 µl and 10 µl max. UV transmissible and low birefringence.
The CrystalMation Intelli-Plate 96-3 low-profile crystallization plate (Art Robbins 102-0001-13 Hampton Research HR3-118 and HR3-119) is a low profile version of the Intelli-Plate 96-3 LVR (Low Volume Reservoir). The plate is designed for sitting drop vapor diffusion crystallization experiments. It is constructed from optically clear, UV-transmissible, chemically resistant plastic with superior low birefringence. The low-profile construction allows for higher density in plate storage and imaging systems, maximizing your investment and valuable space. The plate is designed to be a substantial improvement in existing low-profile plates, allowing for superior sealing due to thicker well design and a flat sealing surface. It has been built to the SBS (Society for Biomolecular Screening) standard dimensions with 8 vertical wells along the left side of the plate (A-H) and 12 horizontal wells along the top of the plate (1-12). It is compatible with automated instrumentation including the CrystalMation line of instruments from Rigaku. The plate features three identical sized sample drop wells per reservoir. The wells are concave depressions along the left side (Y-axis) of the plate and are located on the ledge above the adjacent, flat bottom reagent reservoir. Each well features a round bottom for easy crystal harvesting and can hold up to 1 µl of sample. The multiple well design allows for combinatorial experiments, complex co-crystallization experiments for ligand screening, or for drop concentration variation. The reagent reservoir is typically filled with 50 to 70 µl of reagent. Reservoir volume: 100 µl max. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-2 LVR (Art Robbins 102-0001-00 Hampton Research HR3-143 and HR3-145) is a Low Volume Reservoir version of the original Intelli-Plate. Reservoir volume: 100 µl max. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-3 LVR (Art Robbins 102-0001-03 Hampton Research HR3-183 and HR3-185) is a Low Volume Reservoir, 3 drop well version of the Intelli-Plate. Reservoir volume: 100 µl max. Typical reservoir volume 50 µl. Drop well volume: 1 µl max. UV transmissible and low birefringence.
The Intelli-Plate 96-2 Original crystallization plate (Art Robbins 102-0011-00 Hampton Research HR3-297 and HR3-299) is an optically clear plate for sitting drop vapor diffusion crystallization. All wells have standard 9 mm spacing to conform to SBS standards with 8 vertical wells along the left side of the plate (A-H) and 12 horizontal wells along the top of the plate (1-12). This plate features two locations for sample per reservoir. The sample drop locations are located along the left side of the reagent reservoir, along the Y-axis of the plate. The sample wells are concave depressions on the ledge above the adjacent, flat bottom reagent reservoir. One sample well is located above the second sample well. The top sample well can hold 10 µl or less of sample. The lower sample well can hold 4 µl or less of sample. The reagent reservoir is typically filled with 100 µl of reagent and is capable of holding up to 300 µl of reagent. The sidewalls separating adjacent wells or reservoirs are 0.9 and 1.0 mm thick in order to offer a larger area for sealing the plate and a separation of the reservoirs. This plate is rigid, with virtually no torsional flex and is designed for either manual or automated pipetting. UV transmissible and low birefringence.
The Intelli-Plate Flat Shelf (Art Robbins 102-0001-01 Hampton Research HR8-171 and HR8-172) crystallization plate is a flat drop shelf version of the original Intelli-Plate. Reservoir volume: 300 µl max. No drop well. UV transmissible and low birefringence.
The Intelli-Plate 96-2 Shallow Well (Art Robbins 102-0001-20 Hampton Research HR3-163 and HR3-164) has two identically sized 2 µL reaction wells and a 140 µL screen reservoir. Each of the two identical well features a round bottom shallow well design for easy crystal harvesting and is arranged in an 8 x 12 array. This plate has low birefringence and is UV compatible. This plate is also available in a low profile height (Art Robbins 102-0001-21).
The plates can be sealed using Crystal Clear Sealing Film (HR3-609), 3 inch wide Crystal Clear Sealing Tape (HR4-506) or ClearSeal Film™ (HR4-521).
The height of Intelli-Plate is 0.560 inches. The height of Intelli-Plate Low Profile is 0.315 inches (8.001 mm).
Intelli-Plate 96 (Art Robbins Instruments)
Intelli-Plate 96-3

CAT NO NAME DESCRIPTION
HR3-116 Intelli-Plate 96-2 Low Profile 20 plate case
HR3-117 Intelli-Plate 96-2 Low Profile 80 plate case
HR3-118 CrystalMation Intelli-Plate 96-3 low-profile 20 plate case
HR3-119 CrystalMation Intelli-Plate 96-3 low-profile 80 plate case
HR3-143 Intelli-Plate 96-2 LVR 10 plate case
HR3-145 Intelli-Plate 96-2 LVR 40 plate case
HR3-183 Intelli-Plate 96-3 LVR 10 plate case
HR3-185 Intelli-Plate 96-3 LVR 40 plate case
HR3-297 Intelli-Plate 96-2 Original 10 plate case
HR3-299 Intelli-Plate 96-2 Original 40 plate case
HR8-171 Intelli-Plate Flat Shelf 10 plate case
HR8-172 Intelli-Plate Flat Shelf 40 plate case
HR3-163 Intelli-Plate 96-2 Shallow Well 10 plate case
HR3-164 Intelli-Plate 96-2 Shallow Well 40 plate case
HR3-181 Intelli-Plate 96-2 Shallow Well Low Profile 20 plate case
HR3-182 Intelli-Plate 96-2 Shallow Well Low Profile 80 plate case

Sigma代理  Abcam代理  CST代理  Santa Cruz代理  Biolegend代理 ebioscience代理  Invitrogen代理   millipore代理  BD流式抗体代理   GeneTe x抗体代理  Novus抗体代理   R&D代理 Biovison代理  Jackson代理  MBL抗体代理  ProSpec抗体代理  Bethyl抗体代理  Antibody Revolution抗体代理  Torrey Pines Biolabs代理  Amresco代理  MPbio代理  Laysan bio代理  NANOCS代理  Avanti代理  wako代理  lumiprobe代理(活性荧光染料)   NEB酶代理  Roche酶代理  Toyobo酶代理   USP代理  EP代理  Dr代理  TRC代理  TCI代理  Reagecon代理 Megazyme代理 Hampton代理(蛋白结晶) whatman代理(滤膜滤纸) GE代理(蛋白纯化) Corning康宁代理  Axygen代理 Falcon代理  NISSUI日水代理 Himedia代理 OXOID代理  BD培养基代理 Ludger代理(糖蛋白分析产品)  Eppendorf代理  Labnet代理  标准品代理 抗体代理 酶试剂代理  培养基代理 耗材代理 Elisa试剂盒代理 。

Hampton GRAS 1 • GRAS 2 Screens

Hampton GRAS 1 • GRAS 2 Screens

stallization screen for proteins, including monoclonal antibodies, where Polyethylene glycol is the primary, and Salt the secondary reagent, sampling pH 4-9
GRAS 1 • GRAS 2 ScreensGRAS 1 • GRAS 2 Screens Identify GRAS based reagents that promote crystallization of biotherapeutics for bioprocess, bioformulation, and continuous flow manufacturing applications
Features

Developed at Hampton Research
Generally Recognized As Safe reagent formulation
Samples pH 4.0 – 9.0 without an added buffer
Primary crystallization reagent:

GRAS Screen 1: PEG 300, 400, MME 550, & 600
GRAS Screen 2: PEG 1,000, MME 2,000, 3,350 & 4,000
Secondary crystallization reagent:

24 unique salts
Compatible with Vapor diffusion, microbatch, free interface diffusion
Reagents soluble between 4°C and 30°C

Description
GRAS Screen™ 1 and GRAS Screen™ 2 were developed by Hampton Research for the crystallization of proteins, including monoclonal antibodies. Each of the chemicals in GRAS Screen 1 and 2 have been used under one or more of the following categories. As (1) a Generally Recognized As Safe (GRAS) substance, (2) a pharmaceutical excipient, (3) a normal physiological constituent, (4) a metabolic byproduct, and/or (5) a Everything Added to Food in the United States (EAFUS) substance.
GRAS Screen 1 samples four low molecular weight Polyethylene glycols (300, 400, MME 550, and 600) versus twenty-four salts, encompassing pH 4-9. GRAS Screen 1 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 1 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.
GRAS Screen 2 samples four medium molecular weight Polyethylene glycols (1,000, MME 2,000, 3,350, & 4,000) versus twenty-four salts, encompassing pH 4-9. GRAS Screen 2 is supplied in a 96 Deep Well block format and is compatible with robotic and multi-channel pipet liquid handling systems. GRAS Screen 2 is compatible with vapor diffusion, free interface diffusion, and microbatch crystallization methods. For research use only.

CAT NO NAME DESCRIPTION
HR2-451 GRAS Screen 1 1 ml, Deep Well block format
Price Quantity
$245.00
CAT NO NAME DESCRIPTION
HR2-452 GRAS Screen 2 1 ml, Deep Well block format
Price Quantity
$245.00

Hampton 银弹 Silver Bullets

Hampton 银弹 Silver Bullets

Applications

Additive screen for the optimization of protein crystals
For use with soluble proteins and membrane proteins
Additive screen to discover different crystal forms
Secondary or orthogonal crystallization screen when traditional screens are not successful
Additive screen for the optimization of protein solubility and stability
Features

Developed at Hampton Research
Screens a portfolio of small molecules and excipients for their ability to establish stabilizing, intermolecular, hydrogen bonding, hydrophobic and electrostatic interactions which could promote lattice formation and crystallization

Small organic acids & organic salts
Biologically active small molecules
Amino acids & peptides
Macromolecular digests
Co-factors & ligands
Biochemical pathway intermediates
Nucleotides, pharmacaphores & carbohydrates

Description
Silver Bullets screens a portfolio of small molecules for their ability to establish stabilizing, inter molecular, hydrogen bonding, hydrophobic and electrostatic interactions which could promote stability, lattice formation, and crystallization.1-3
Published results with the Silver Bullets have been very encouraging, with more than twice as many proteins being crystallized overall as were crystallized from controls free of any small molecules.1-3
X-ray diffraction analysis has revealed the small molecule Silver Bullets in the crystal lattice, involved at the centers of hydrogen bonding networks and electrostatic interaction.1-3 Silver Bullets is compatible with hanging, sitting and sandwich drop vapor diffusion, microbatch, free interface, and microdialysis crystallization methods. Silver Bullets can be used with Dynamic Light Scattering (DLS), ThermoFluor, and Size Exclusion Chromatography assays.
Silver Bullets reagent portfolio
•Organic salts and acids
•Biologically active small molecules
•Amino acids and peptides
•Macromolecular digests
The Silver Bullets kit is a library of small molecules that have been shown to promote crystal lattice formation. X-ray diffraction analysis has demonstrated the reagents have the ability to:
•Stabilize the conformation of the protein
•Perturb the interaction of the protein with the solvent
•Participate in forming important lattice contacts
•Build the crystal lattice by forming reversible cross-links between the macromolecules in the crystal
The Silver Bullets kit is composed of 96 solutions in a single Deep Well block (Greiner 786261 block specifications: Total Volume: 0.5 mL Working Volume: 0.03 – 0.7 mL at Room Temperature 0.03 – 0.55 mL at -20ºC, Well Profile: Conical (V), Bottom Well Bottom: Solid, Plate Color: Translucent), HT format.
Each Silver Bullets reagent is a mixture of small molecules or macromolecular digests in 0.02 M HEPES sodium pH 6.8 buffer. Each solution contains between 2 and 20 small molecules.
Silver Bullets reagent volume is 0.5 ml (each well).
ThermoFluor is a registered trademark of Johnson & Johnson.

Hampton  Silver Bullets Bio

Silver Bullets • Silver Bullets Bio
Silver Bullets • Silver Bullets Bio
上海金畔生物作为Hampton蛋白结晶产品的代理商,竭诚为您服务,欢迎新老客户咨询。
Applications 应用

Additive screen for the optimization of protein crystals
For use with soluble proteins and membrane proteins
Additive screen to discover different crystal forms
Secondary or orthogonal crystallization screen when traditional screens are not successful
Additive screen for the optimization of protein solubility and stability

Features

Screens a portfolio of small molecules and excipients for their ability to establish stabilizing, intermolecular, hydrogen bonding, hydrophobic and electrostatic interactions which could promote lattice formation and crystallization

Small organic acids & organic salts
Biologically active small molecules
Amino acids & peptides
Macromolecular digests
Co-factors & ligands
Biochemical pathway intermediates
Nucleotides, pharmacaphores & carbohydrates

 

Developed at Hampton Research
Two sets of 96 reagents, composed of more than 1,090 chemicals, of which more than 400 are uniqu

Please note, the Silver Bullets Bio Screen is temporarily unavailable as a new formulation is in development
 

Hampton 蛋白结晶优化试剂 Optimization Screens

Hampton 蛋白结晶优化试剂 Optimization Screens

1、Solubility & Stability Screen  蛋白特异性试剂优化溶解性和稳定性
Protein specific agents for optimization of solubility & stability  
2、Solubility & Stability Screen 2   离子缓冲液
Buffer, pH & ionic strength screen for optimization of solubility & stability
3、Slice pH    PH缓冲液
pH & buffer screen for optimization of crystals or sample solubility & stability
4、Additive Screen  96孔板添加剂试剂盒
96 compound screen for optimization of crystal size & quality
5、Silver Bullets • Silver Bullets Bio
Small molecule additive screen for optimization of crystal size & quality
6、Detergent Screen
Detergent screen for optimization of crystals or sample solubility & stability
7、Ionic Liquid Screen
Ionic liquid additive screen for optimization of crystal size & quality
8、StockOptions Buffer Kits
Titrated buffer sets for optimization of crystals or sample solubility & stability
9、StockOptions Polymer
n of crystal size & quality
10、StockOptions Salt
Salt reagent kit for optimization of crystal size & qualit
11、Polymer reagent kit for optimizatioy
Proti-Ace
In situ proteolysis kit protein for crystallization screening & optimization
12、Reductive Alkylation
Reductive alkylation kit for crystallization screening & optimization
13、Silica Hydrogel Kit
pH neutral silica hydrogel matrix crystallization
14、Low Melting Agarose
Agarose gel matrix crystallization
15、CryoPro
Water soluble cryoprotectant reagent set
16、Heavy Atom Screens
Heavy atom kits for multiple isomorphous replacement
17、I3C Phasing Kit
Produce heavy atom derivative of biological macromolecules for phasing